TRA Job Ready Program workplace assessment for trade graduates in Australia

TRA Job Ready Program (JRP): Eligibility, Steps, Fees, Hours

You studied a trade in Australia, passed your Provisional Skills Assessment and you're working in your field. The next big step towards permanent residency is the Job Ready Program, run by Trades Recognition Australia (TRA).

The Job Ready Program is different from most skills assessments. It's not a one-off paper check. It follows you at work for at least 12 months and assesses how you actually perform on the job. That makes it fairer for genuine tradespeople, but it also means more steps, more paperwork and more ways to slip up.

JRP in 30 seconds: The Job Ready Program (JRP) is a TRA skills assessment for international graduates of an Australian VET trade course. It takes at least 12 months of full-time paid work with a TRA-approved employer and has three steps: Job Ready Employment, a Workplace Assessment and a Final Assessment. The total TRA fee is $3,410.

  • 12 months paid work
  • $3,410 total TRA fee
  • 3 steps

Job Ready Program Hours, Steps and Fees

The TRA Job Ready Program in four numbers, taken from Trades Recognition Australia's own program page and guidelines.

Paid work in your trade

12months

Minimum full-time paid employment in your trade, with a TRA-approved employer.

Full-time hours

38hours / week

TRA's average for full-time. Fewer hours count pro rata, so the program takes longer.

Program steps

3steps

Job Ready Employment, then a Workplace Assessment, then the Final Assessment.

Total TRA fee

$3,410AUD

  • Needs a successful PSA outcome from the last 3 years
  • Finish your 12 months within 3 years of starting
  • Up to 4 weeks of paid leave counts towards the 12 months
  • Each extra workplace assessment costs $2,845

TRA Fees for Job Ready Program are set by TRA and may change.

What Is the Job Ready Program in Australia?

The Job Ready Program is an employment-based skills assessment. Instead of relying only on certificates, TRA checks that your real workplace skills meet Australian industry standards in your nominated occupation.

When you finish, you receive a Skills Assessment Outcome Letter. You use it to apply for a skilled visa, such as a points-tested permanent visa. It's a skills assessment, not a qualification, and it's a key piece of your PR application.

By the end of the program, TRA needs to be confident that you can:

  • Understand and follow complex instructions, both written and spoken
  • Do your trade work without supervision, to Australian industry and occupational standards
  • Work safely under workplace health and safety rules
  • Choose and use the right tools and equipment for the job
  • Show the employability skills expected in your industry's training package

Who Is Eligible for the TRA Job Ready Program?

To join the Job Ready Program, you need all three:

  • A successful PSA

    A successful Provisional Skills Assessment (PSA) from TRA, issued within the last 3 years. The PSA always comes first.

  • A TRA-approved employer

    You're working in Australia with a TRA-approved employer, in a nominated occupation that TRA assesses. TRA approves your employer as part of your first step.

  • A visa with work rights

    Your visa must allow you to work and last long enough to finish the program. Keeping a valid visa the whole way through is your responsibility, not TRA's.

Not eligible

These licensed occupations can't use the JRP

  • Electrician (General and Special Class)
  • Plumber (General)
  • Air-conditioning and Refrigeration Mechanic

If you work in one of these trades, you'll need a different TRA pathway. We can help you find the right one.

Common JRP occupations

CookChefBakerPastrycookCarpenterJoinerBricklayerMotor mechanicPanelbeaterHairdresser

…and many other trades. Check TRA's list of accepted qualifications and occupations for yours.

Job Ready Program Steps: How the JRP Works

The JRP has three steps, and you must finish each one before moving to the next.

  1. Step 1: Job Ready Employment (JRE)

    Job Ready Employment is the first step of the TRA Job Ready Program. You register on the TRA online portal, and TRA checks your eligibility and approves your employer. Your 12-month Job Ready Program clock starts on your JRE start date. Along the way, you’ll submit employment progress reports and pay evidence to show your hours and skills in your nominated trade.

    TRA fee $490
  2. Step 2: Job Ready Workplace Assessment (JRWA)

    Once you’ve completed at least 6 months of full-time equivalent work, TRA invites you to apply for your Job Ready Workplace Assessment. TRA refers you to an approved RTO, and an assessor visits your workplace. They talk with you about your trade and watch you complete real tasks on the job. Your result is either Job Ready or Not Yet Job Ready.

    TRA fee $2,845
  3. Step 3: Job Ready Final Assessment (JRFA)

    After a Job Ready workplace result and at least 12 months of full-time (or equivalent) paid work, you apply for your Job Ready Final Assessment. TRA reviews your complete JRP file and issues your Skills Assessment Outcome Letter. You can use this TRA skills assessment to apply for your skilled visa in Australia.

    TRA fee $75

Send us an enquiry

Tell us about your trade and where you are up to. A member of our team will get back to you.

For example: welder, bricklayer, carpenter, motor mechanic
We only use your details to reply to your enquiry. See our privacy policy.

How Many Hours Do You Need for the Job Ready Program?

You need at least 12 months of full-time paid employment, or the part-time equivalent, with TRA-approved employers. TRA counts an average of 38 hours a week or more as full-time. Anything less is calculated pro rata, so part-time work stretches the program out.

Two more time rules

  • You must complete your 12 months of employment within 3 years of starting the program.
  • If you were already working for your first registered employer before you applied, you may be able to claim up to 3 months of eligible prior employment. The work must be paid, unbroken and in your nominated occupation, and TRA has to approve it.
Average hours per week vs time to reach 12 months full-time equivalent
38+ hours
About 12 months
30 hours
About 15 months
25 hours
About 18 months
19 hours
About 24 months

A rough guide calculated pro rata from TRA's 38-hour definition. Unpaid leave and gaps add time.

Planning your JRP around your 485 visa?

Your hours, your employer and your visa expiry all need to line up. A registered migration agent at E2VS will map your JRP timeline so you don't run out of visa before you finish.

Plan My JRP Timeline

Job Ready Program Fees (2026)

The total TRA cost to complete the Job Ready Program is $3,410 AUD. You don't pay it all at once. A fee is due at the start of each step.

TRA fees by step

JRP stepTRA fee (AUD)
Job Ready Employment (JRE)$490
Job Ready Workplace Assessment (JRWA)$2,845
Job Ready Final Assessment (JRFA)$75
Total$3,410

Things to budget for

  • Extra workplace assessments. If your first JRWA result is "Not Yet Job Ready" and you choose a new assessment, you pay the JRWA fee again, so your total can be higher than $3,410.
  • Your Provisional Skills Assessment. It's a separate application with its own fee, paid before you start the JRP.
  • Professional fees, if you use a registered migration agent.
Fees and processing times are set by Trades Recognition Australia and may change. Always check the official TRA Job Ready Program page before you apply or pay.

JRP Processing Time for Each Step

These are TRA's current guides. They can change, and missing documents always slow things down.

  1. Job Ready Employment registration

    After you lodge your Job Ready Employment application, TRA checks your eligibility and registers you for the program. Expect to hear from TRA within about 2.5 months.

  2. Workplace Assessment invitation

    TRA invites you to apply for your Job Ready Workplace Assessment once you’re eligible. This usually happens within about 8 months of your JRP start date.

  3. Workplace Assessment referral

    After you apply for your workplace assessment, TRA confirms your details within about 3 months. It then refers you to an approved Registered Training Organisation (RTO).

  4. Workplace Assessment visit

    Your RTO assessor usually visits your workplace within about 1 month of referral. They’ll talk through your trade skills and watch you complete real tasks.

  5. Workplace Assessment outcome

    TRA lets you know your Job Ready Workplace Assessment result within about 2 months. Your outcome is either Job Ready or Not Yet Job Ready.

  6. Final Assessment outcome letter

    Once you’re eligible and apply for your Job Ready Final Assessment, TRA sends your Skills Assessment Outcome Letter within about 14 days of your application.

Add these together and most applicants should plan for at least 12 months, and often longer, from registration to outcome letter. That's why starting early in your 485 visa matters.

Job Ready Program Employer Requirements

Your employer plays a key role in your TRA Job Ready Program. A TRA-approved JRP employer must:

  • Give you skilled work in your nominated occupation every day, not lower-level tasks
  • Pay you correctly under the right award, with proper payslips, super and leave
  • Provide the tools and work environment your trade needs to show your full skills
  • Have a qualified supervisor who can confirm your skills and sign your JRP progress reports

Changing jobs during the JRP?

Yes, you can change employers during the Job Ready Program. You must register your new employer with TRA within 14 days of starting, and complete at least 6 months full-time equivalent with one registered employer.

Cash-in-hand work and employers who don’t issue payslips often cause JRP problems. Make sure every job is properly on the books.

Job Ready Program for Welders, Carpenters and Bricklayers

  • Welders (First Class)

    Welders are assessed under ANZSCO 322313 in the TRA Job Ready Program. Your workplace assessor will look at real fabrication work: reading drawings, choosing the right welding process, and producing safe, accurate welds to Australian standards. Keep your JRP progress reports detailed and specific.

  • Carpenters

    Carpenters are assessed under ANZSCO 331212. During your Job Ready Workplace Assessment, expect the assessor to watch you on real jobs: reading plans, measuring and setting out, framing, using power tools safely, and finishing work to standard. Most carpenters enter the JRP with a Certificate III in Carpentry.

  • Bricklayers

    Bricklayers are assessed under ANZSCO 331111. Your JRP assessor will look at the full range of your trade on site: reading plans, setting out, laying bricks and blocks level and plumb, and working safely. Make sure your employer gives you varied, skilled bricklaying work. Keep photos and notes of your jobs to support your Job Ready Program progress reports.

What If Your Workplace Assessment Says "Not Yet Job Ready"?

A "Not Yet Job Ready" result isn't the end of your JRP. Under TRA's guidelines you have two options:

No fee

Ask for a review

Request a review of your Job Ready Workplace Assessment within 45 days of your outcome email by sending TRA’s Review Request Form. You get one review per assessment. It’s based only on the evidence from your original assessment, so new evidence won’t be considered.

Apply for a new workplace assessment

Use the assessor’s feedback to close your skill gaps, keep building experience with your registered employer, and apply for a subsequent Job Ready Workplace Assessment. The full $2,845 JRWA fee applies again, so make sure you’re ready before you book.

Not sure which option is right? A review only helps if your original evidence was strong enough. If the feedback shows real skill gaps, a new workplace assessment after more experience is usually the better choice. Talk to E2VS before you decide.

How E2VS Helps With Your Job Ready Program

  • Eligibility and timeline check. We confirm your PSA, occupation, employer and visa line up before you register.
  • Employer readiness. We help make sure your employer, payslips and supervisor reports meet TRA's requirements.
  • Workplace assessment preparation. We help you understand what the assessor will look for in your trade.
  • Visa planning. Our registered migration agent plans your 485 visa, your JRP finish date and your next skilled visa, so there are no gaps.
  • Melbourne CBD or online. Meet us at Little Collins Street, or online from anywhere in Australia.
  • 3,000+Students assisted since 2016
  • 99%Visa granted
  • 10+Years of experience

Job Ready Program FAQs

At least 12 months of full-time (or equivalent) paid work, plus assessment and processing time. Part-time work, gaps or a second workplace assessment can make it longer. You must complete your employment within 3 years of starting.

The total TRA fee is $3,410 AUD: $490 for Job Ready Employment, $2,845 for the Workplace Assessment and $75 for the Final Assessment. It can cost more if you need another workplace assessment.

Yes. You need a successful Provisional Skills Assessment from TRA, issued within the last 3 years, before you can start the JRP.

No. Electrician (General and Special Class), Plumber (General) and Air-conditioning and Refrigeration Mechanic aren't eligible for the JRP and must use a different TRA pathway.

Yes. Register your new employer with TRA within 14 days of starting. You'll need at least 6 months full-time equivalent with one registered employer during the program.

A Skills Assessment Outcome Letter from TRA. You can use it to apply for a skilled visa, such as a points-tested permanent visa.
Your 485 clock is ticking

Start Your Job Ready Program With a Clear Plan

The Job Ready Program is the bridge between your trade qualification and a skilled visa. Do it well and you come out with the skills assessment your PR application needs. Rush it, or get the timing wrong with your visa, and you can lose months.

Talk to E2VS in Melbourne CBD, in person or online. We'll check your eligibility, plan your JRP around your visa, and help you reach your Job Ready outcome with confidence.

Consultations are AUD $100 (standard) or $150 (urgent).

WhatsApp UsUseful Links